COUNTER PRESSURE
FILLING MACHINES
REDUCE PRODUCT LOSS AND OXYGEN PICKUP DURING PACKAGING WITH COUNTER PRESSURE FILLING TECHNOLOGY
CLEAN
Completely CIP "Clean in Place" capable to easily sanitize between runs.
FILL
Counterpressure filling allows for complete fill control without exposing your beverage to the atmosphere.
SEAM
All mechanical seaming operation provides consistent seams every time.
BARRELS PER HOUR
10
CASES PER
HOUR
137
CANS PER MINUTE
55
GALLONS PER HOUR
309
HECTOLITRES PER HOUR
11.7
FEATURES
-
Lowest Dissolved Oxygen pickup in the micro canning industry.
-
Can beverages under a wider range of temperatures and carbonation levels with Counter Pressure technology.
-
TACT style cleaning compatible:
Temperature: Brewery hose rated for high pressure and temperature(up to 180°F/82°C) with Tri-Clover sanitary fittings.
Action/Flow Rate: Cleaning solution is recirculated to achieve high flow rates and conserve resources.
Chemicals: 304 stainless steal construction can withstand caustic chemicals.
Time: PLC controlled to set the desired cleaning time.
-
HMI provides full control over fill rates, pressure, and snift rates.
-
Built in buffer tank pressurizes liquid with CO2 prior to filling effectively keeping CO2 in solution.
-
Post fill to seam foam management with controlled pressure release.
-
CO2 monitoring throughout the fill process.
-
Audible and visual alerts when the system is compromised.
-
Cam driven seaming operations for consistent seals every time.
-
Integrated sensors for monitoring stacked lids and lid drop.
SPECIFICATIONS
Dimensions (LxWxH):
84" x 34" x 70"
(2134 x 864 x 1778mm)
Weight:
1300lbs (590kg)
Power:
208 - 240V, 3 phase, 27amps
Air:
11CFM@110PSI
CO2:
60 PSI
(16oz: 50lbs/110cs)
(12oz: 35lbs/100cs)
Beverage:
Temperature: 28° - 52°F (-2.2° - 11°C)
Carbonation: 0 - 4 volumes CO2 (0 - 8g/L)
13" TOUCHSCREEN HMI
Control and monitor purge cycles, tank pressure, pump rate, fill rate, settle time, and snift cycles all from one place.
LOWER DO LEVELS AND LESS WASTE
CLEAN IT LIKE YOU MEAN IT
All components are rated for high temperature and pressure allowing for increased contact time with caustic chemicals. The closed system also saves resources by recirculating the cleaning liquid.
304 stainless steel counter-pressure fill heads create a seal over the can, evacuate oxygen with CO2, then fill cans using a change in pressure keeping more carbonation in suspension and eliminating the need to overfill.
LOW FOAM FILLING
Fill under a wider range of temperatures and carbonation levels without overfilling by pressurizing the liquid before injecting into cans.
QUALITY CONSTRUCTION
We manufacture the majority of parts at our facility in Golden, CO using the highest quality materials to ensure the equipment is built to last.
EASY
INTEGRATION
The filler easily integrates with existing conveyance, twist rinses, and other equipment you may already have.
SUPER FAST SINGLE HEAD SEAMER
The seamer is timed with the feed screw to complete critical seaming operations exactly the same every time. Mechanical operations create consistency and allow for easy troubleshooting and adjustments.
ANY SIZE CAN
With change parts, the filler can accommodate standard, sleek, and slim can sizes of any volume.
CCL-45 FILLER
FILL WITH COUNTER PRESSURE FOR A BETTER BEVERAGE
LOW TO NO OXYGEN ABSORPTION DURING PACKAGING
FILL BEVERAGES WITH HIGH CARBONATION
FILL BEVERAGES AT HIGH TEMPERATURES
CLEAN IN PLACE WITH STAINLESS STEEL CONSTRUCTION
CCL-45 FILLER ACCESSORIES
FOAM JETTER
Force a foam break out just before the seamer in beverages with rapidly dissipating foam to eliminate oxygen in the headspace of filled cans. The Foam Jetter is great for Seltzers.
CO2 TUNNEL
Create a CO2 rich environment between the fill heads and seamer to reduce the possibility of oxygen absorption.
LID DROPPER UPGRADE
A self contained and simplified lid dropper design offers easier change overs for different can diameters, less lid jams, and reduced potential for damage to can ends. Included on all new fillers.
NITRO DOSER
A Nitro Doser is used to pressurize the container when filling still beverages, preserve the product by forcing oxygen out, or to nitrogenate the beverage.
CO2 PRE-PURGE
Fill empty cans with CO2 before they move under the fill heads. Pre-purging with CO2 will not only reduce the possibility of oxygen absorption but will help achieve higher fill speeds.
.jpg)
This counter pressure keg filler not only cuts your time down per keg, but you have zero loss per keg!
Codi Manufacturing 2023 Craft filler - The Codi CCL-45 craft canning system is a counter pressure filler paired with a single head seamer. Our patented technology on the filling side of our craft canning line cannot be replicated by the rest. When we say counter pressure filler, that's exactly what we mean! Sure we were the laughing stock of those first trade shows, rolling in our stainless steel machine past all the un-cleanable plastic competition whose business model is based on replacement parts, but who’s laughing now? As they all try their best to replicate what we do better than anyone, we still stand supreme. Why risk infection with another canning line? Why opt for plastic that even windex is too harsh to clean with? Most importantly, why settle for a foreign made, mass produced machine? The Codi counter pressure craft filler is without hesitation the best money can buy. Our service cannot be beat, and our continued training is without a doubt next level! Counterpressure filling allows for complete fill control without exposing your beverage to the atmosphere. All mechanical seaming operation provides consistent seams every time. Completely CIP "Clean in Place" capable to easily sanitize between runs. 304 stainless steel counter-pressure fill heads create a seal over the can, evacuate oxygen with CO2, then fill cans using a change in pressure keeping more carbonation in suspension and eliminating the need to overfill.
