Containter Cleaning
Ionizer
CODI's Ionized Air Rinse replaces traditional water rinsing, eliminating water use while improving container cleanliness. It neutralizes static inside each can so dust and debris release cleanly, without adding moisture that can increase dissolved oxygen or affect flavor. Units mount directly to twist rinses, lowerators, or vacuum conveyors and are available in three configurations: a standard compressed-air ionizer for lower- to mid-speed lines, a compressed-air ionizer with blower debris capture for dusty environments, and a blower ionizer with integrated debris capture for high-speed lines and reduced compressed-air load.
Features
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
Dimensions & Weight
-
L: 84" (2134 mm)
-
W: 34" (864 mm)
-
H: 70" (1778 mm)
-
Weight: ~1300 lbs (590 kg)
Performance
-
Speed: Up to 55 CPM under ideal conditions
Utilities
-
Power: 208–240 V, 3 Phase
-
Air: 11 CFM @ 110 PSI
-
CO₂: 60 PSI (16 oz: 50 lbs/110 cs; 12 oz: 35 lbs/100 cs)
Beverage Parameters
-
Temperature: 28 – 52 °F (–2 – 11 °C)
-
Carbonation: 0 – 4 vol CO₂ (0 – 8 g/L)
-
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
Filling & Carbonation Control
-
Counterpressure filling ensures precise fills without exposing product to the atmosphere.
-
Pressurizes liquid before injection, allowing filling across wider temperature and carbonation ranges without overfilling.
-
304 stainless steel counterpressure fill heads seal the can, purge oxygen with CO₂, then fill under pressure to retain carbonation and reduce waste.
CIP
-
Fully CIP (Clean-in-Place) capable for quick, thorough sanitation between runs.
-
High-temperature, high-pressure rated components allow longer contact time with caustic cleaners.
-
Closed-loop cleaning system saves resources by recirculating liquid.
Seaming & Consistency
-
Seamer is synchronized with the feed screw to perform critical operations at the exact same timing every run.
-
Mechanical seaming delivers consistent seams and simplifies troubleshooting or adjustments.
Flexibility & Integration
-
Change parts allow quick conversion for standard, sleek, and slim cans of any volume.
-
Easily integrates with existing conveyors, twist rinses, and other equipment.
Monitoring & Control
-
Centralized control of purge cycles, tank pressure, pump rate, fill rate, settle time, and snift cycles.
Durability and Service
-
Crafted with 304 stainless steel and precision-machined in-house for long-term durability.
-
In-house service technicians available whenever you need assistance.
-
