top of page

Daisy Topper
Specialty Seamer

The Codi Daisy Topper is the exclusive seaming and crimping machine for Meadow (https://meadow.global/).

 

Engineered around servo-controlled timing, dedicated screw feeds, and a tightly integrated conveyor path, the Daisy Topper maintains accurate can positioning through every stage of the process—ensuring reliable seams and smooth downstream flow. With onboard HMI control, safety interlocks, and flexible run settings.

  • Machine Dimensions

    • Overall Length: 158 in (4,013 mm)

    • Overall Depth: 40 in (1,016 mm)

    • Overall Height: 85 in (2,159 mm)

    • Weight: 2,069 lbs (939 kg)

    Electrical

    • Voltage: 380–500 VAC, 3-phase, 50/60 Hz

    • Full Load Current: 5 A

    • Ethernet: Required for remote support

    Air Requirements

    • Operating Pressure: 100–110 psi (6.9–7.6 bar)

    • Air Consumption: 10 SCFM (0.28 m³/min)

    • Air Line Size (Minimum): 1/2 in ID (12.7 mm)

    • Recommended Line Size: 3/4 in ID (19 mm)

    • Air Quality: Clean & dry, ISO 8573-1:2010 compliant

    Operating Speeds

    • Seamer Speed: 45–55 RPM (45–55 CPM equivalent)

    • Conveyor Speed: Adjustable through HMI

    • Average CPM: Live tracked and resettable

    Mechanical Integration

    • Outfeed Plate Clearance: Business-card gap (~0.010–0.020 in / 0.25–0.5 mm)

    • Infeed/Outfeed Height: Adjustable via threaded leveling feet

    • Changeovers:

      • Height changeover via pin swap (200 ↔ 202)

      • Diameter changeover requires screw, chuck, and lid-dropper swap

  • Seaming & Crimping Control

    • Integrated seamer and crimper with independent motor control

    • Adjustable seamer RPM (45–55 rpm) and conveyor speed for line balancing

    • Precise screw timing and dwell positioning for accurate can placement

    • Onboard run counters and seam statistics for monitoring performance

    Guided HMI Operation

    • Intuitive touchscreen navigation with unlock, settings, and run menus

    • Independent start/stop control for seamer, crimper, and conveyor

    • Administrator access for protected configuration changes

    • Can-size presets linked to encoder timing for correct dwell alignment

    Mechanical Integration

    • Rigid frame with level-adjustable feet or caster support

    • Seamless connection to upstream infeed and downstream discharge conveyors

    • Fine adjustments for rail spacing, lid drop height, transfer plate position, and infeed alignment

    • Designed to keep the seamer and crimper consistently leveled for optimal operation

    Maintenance & Reliability

    • Routine greasing points for seamer bearing blocks and OP rollers

    • Built-in diagnostics for VFD and servo faults

    • Wear-part inspection guidelines with estimated can-count intervals

    • Conveyor belt tensioning and link removal procedure to maintain positive engagement

     

  • Codi warranties our products against defects in design and workmanship for up to 12 months after shipment or 1,000,000 cans produced, whichever comes first.

    ​

    Third-party components are covered under their manufacturer’s warranties, and we’ll support you in making any claims.


    During the warranty period we will repair or replacement of defective parts (wear parts excluded). 

Explore More

bottom of page