Blower Dry Off System
SURE DRY BLOWER
Post-fill can dryer | blower dry-off system | inline container drying for beverage packaging lines
The CODI Sure Dry Blower is an inline can drying system that uses an adjustable air manifold to blow water off the tops and sides of cans. Moisture on cans after filling causes label adhesion failures and damages corrugated cardboard trays at pack-out. Powered by a low-pressure centrifugal blower rather than a compressor, it uses significantly less energy than compressed-air drying. It fits any existing conveyor, handles all standard can and bottle sizes, and offers tool-free access for nozzle and manifold cleaning.
The CODI Sure Dry Blower is an inline can drying system that uses an adjustable air manifold to blow water off the tops and sides of cans. Moisture on cans after filling causes label adhesion failures and damages corrugated cardboard trays at pack-out. Powered by a low-pressure centrifugal blower rather than a compressor, it uses significantly less energy than compressed-air drying. It fits any existing conveyor, handles all standard can and bottle sizes, and offers tool-free access for nozzle and manifold cleaning.
PRODUCT FEATURES
Focused Air Manifold
Adjustable angled fingers direct airflow precisely across the tops and sides of each can. More effective than generic air curtains that blast in one direction.
Blower-Powered
Low-pressure centrifugal blower is sized per application. Draws significantly less energy than compressed-air drying and doesn't compete with other compressor-dependent equipment on your line.
Integrated Drip Pans
Captures excess water at the source. Keeps the workspace clean without additional drainage infrastructure.
Tool-Free Maintenance
Nozzles and manifold are accessible without tools. Optional rinse box with integrated drip pans pairs directly with the blower for a combined wash-and-dry station.
PRODUCT INFORMATION
NEMA 1 standard (3R optional)
304 stainless steel frame
Essential for canning
Dimensions & Weight
L: 20" (508 mm)
W: 25" (635 mm)
H: 31" (787 mm)
Weight: ~225 lbs (102 kg)
Certification
UL
CSA Compliant
CE Compliant
Voltage
208-240V / 3PH
380-500V / 3PH
CPM
Specify
Tin Line
49
Conveyor Integration
CODI
Non-CODI
Air Drying System
Removes residual moisture from containers prior to downstream packaging.
Focused air manifold with adjustable angled fingers
Low-pressure centrifugal blower sized per application
Provides consistent, uniform drying across containers
Container Compatibility
Designed to handle a range of beverage container formats.
Supports all standard can sizes
Adaptable for bottles and specialty containers
Maintains consistent performance across formats
Line Integration
Installs easily into existing conveyor systems.
Fits virtually any conveyor layout
Standard 40” (1016 mm) adjustable deck height
Compatible with upstream rinse systems
Construction & Maintenance
Built for durability with easy service access.
304 stainless steel frame and components
Tool-free access for nozzle and manifold cleaning
Designed for continuous operation
Optional Configuration
Expandable to support additional cleaning and drying needs.
Optional rinse box with integrated drip pans
NEMA 1 standard, NEMA 3R optional for environment
ACCESSORIES
RESOURCES
FAQ
Why use a blower instead of compressed air to dry cans?
A low-pressure blower moves far more air per unit of energy than a plant air compressor, cutting operating electricity costs sharply. It also removes the risk of compressor oil or moisture line carryover contaminating clean can surfaces before labeling.
What does drying cans accomplish on a packaging line?
It removes standing water and condensation left by filling, warming, or rinsing. A dry can wall is essential for pressure-sensitive label applicators to achieve clean adhesion without bubbling, slipping, or flagging.
Can the manifold be adjusted for different container sizes?
Yes. Fully adjustable air knives allow you to direct the airflow precisely across the top, sides, and bottom of standard, sleek, or slim cans, as well as bottles.
Does it work with conveyors already on the floor?
Yes. The blower enclosure and air knife manifold mount directly over existing CODI or third-party conveyance without requiring track modifications.
